Transmission (CB) – Ceramizer for manual transmissions and rear axles
66,00 PLN (53,66 PLN netto)
A preparation that regenerates and protects manual transmissions. It can also be used for rear bridges and reducers.
In stock
Previous lowest price was 66,00 PLN.
Secure, fast payments
Shipping in 24h
Do you have a question?Call us: 22 498 09 08
Product description
Ceramizer® CB is a modern and innovative addition to the transmission oil, which perfectly protects the mechanism and provides protection against excessive wear and tear when covering a distance of about 100,000 km. It is sufficient to add the preparation to the transmission oil filler. Laborious disassembly is not necessary. After adding the preparation, you only need to drive a route of 1500 km.
It is worth noting that the Ceramizer® gearbox preparation rebuilds synchronizers and bearings. These are the elements most exposed to wear and damage. The characteristic sound of grinding when changing gears is a clear signal that the synchronizers have worn out. On the other hand, excessive noise while driving heralds poor bearing condition.
The additive to the gearbox oil works on the principle of creating a special ceramic-metal layer. This layer protects parts of the gearbox, is durable and has a low coefficient of friction. It is lower than 0.02, and therefore we are dealing with a coefficient 10 times lower than the normal contact of two steel parts. All this means that Ceramizer® protects the transmission components well over a distance of up to 100,000 km.
An additional layer, created by the preparation for the gearbox, replenishes any cavities, depending on the degree of wear. More worn areas are characterized by a thicker protective coating, while with less consumption we are dealing with a thinner layer. Thanks to this, the regeneration of the gearbox is carried out without disassembly. This means that the driver saves time and money. The use of Ceramizer® is not fraught with the risk of any side effects.
Why use ceramizer® CB transmission oil additive?
- Friction surfaces within the gearbox are regenerated without costly and time-consuming disassembly. The whole process takes place during the normal operation of the vehicle.
- The service life of the gearbox increases up to 5 times.
- While driving, gear changes are smoother and more comfortable. The problem of grinding when changing gears is eliminated.
- The use of a gearbox oil additive avoids major breakdowns and costly repairs.
Gearbox regeneration
Longer engine life
Easier gear shifting
Ability to avoid costly breakdownsUsage method
| Amount of oil in the gearbox [L]: | 1-2 L | 2-5 L | 5-8 L | 8-11 litres |
|---|---|---|---|---|
| Number of dispensers (dosage) | 1 dos | 2 dos | 3 dos | 4 dos |
Mogą Cię zainteresować
Materials to download
Find out more
Simple and effective preparation for gearbox
Using the Ceramizer® transmission oil additive is simple, but it brings a lot of benefits. All you need to do is apply the preparation to the transmission oil filler so that the entire mechanism is regenerated and strengthened. Thanks to the protection provided by the action of the preparation, the risk of failure is significantly reduced. It is enough to regularly use the preparation for the gearbox for several dozen zlotys to avoid repair, the costs of which can reach several thousand zlotys.
