Powered by Smartsupp
+48 22 498 09 08 info@ceramizer.pl
Log in

Industrial research

Where to buy?
Partner map
Apply in the workshop
Workshop map

  • Silnik (CS) – Ceramizer do silników czterosuwowych benzynowych, Diesla, LPG


    Zobacz produkt

  • (Skrzynia) Ceramizer CBAT do automatycznych skrzyń biegów


    Zobacz produkt

  • Skrzynia (CB) – Ceramizer do manualnych skrzyń biegów i tylnych mostów


    Zobacz produkt

  • (Silnik+skrzynia) Ceramizer CM – do silników motocyklowych czterosuwowych


    Zobacz produkt

  1. Examination of the ceramic-metal layer after the application of Ceramizer®. The study was conducted at the AGH University of Science and Technology Im. Stanisław Staszic in Krakow (Faculty of Mechanical Engineering and Robotics).
  2. Examination of Ceramizer® carried out on a device for diagnosing gears called Vibrex. Study ed. Ph.D. Jerzy Tomaszewski and Józef Drewniak.
  3. Study of the influence of Ceramizer® (here under the name TES-17) on the operation of the gearbox in industrial conditions. Study ed. Ph.D. Jerzy Tomaszewski.
  4. A study confirming the lack of influence of Ceramizer® on the oil parameters. Carried out at the Air Force Institute of Technology.
    Ceramizer is neutral to oil, in practice this means that Ceramizer® can be applied to any oil while using the parameters that the oil recommended for a given mechanism has. The preparation is not so-called. oil thickener.
  5. Reference Cementownia Dyckerhoff Sp. z o.o. in Nowiny.
  6. ItWL test to determine the viscosity, density, flash point and reaction of the water extract for CS.
  7. ITWL test to determine the viscosity, density, flash point and reaction of the water extract for the CB preparation.
  8. ITWL test to determine the viscosity, density, flash point and reaction of the water extract for CP.

  9. Report on the effects of the use of the oil additive “Ceramizer” on the example of the drive gear of the raw material mill in the Nowiny Cement Plant