Improper use of the vehicle is a common cause of degradation and wear of any engine. One example of acting to its detriment is overburdening it when it is not yet hot, resulting in a loss of lubrication.
The degree of engine damage determines how expensive the repair will be. Typical diagnostics include computer diagnosis, compression measurement, timing check and oil pressure measurement. However, there are damages for which a visual assessment of the damage is sufficient – for example, breaking the chain or rearranging the timing. In this case, it is necessary to overhaul the engine. However, the cost may be so high that it will be more profitable to replace the engine with another used model.
How much does it cost to overhaul the engine and what is taken into account
A general overhaul of the engine is also expensive – if you find the opportunity to do it cheaply, you better be on your guard. Remember that deciding on non-original spare parts only creates the appearance of savings. Poor quality spare parts can cause breakdowns and additional monetary losses.
The final amount of the repair consists not only of the price of the replaced engine part, but also the purchase of other additional parts necessary to perform the repair and the labor itself. The type, model and age of the vehicle we want to repair is also of great importance.
Therefore, depending on many factors, the cost may vary. However, it is possible to pre-estimate a small and large overhaul on the example of a 1.6-liter engine (gasoline) using original parts – the cost of a small overhaul reaches PLN 2,000, while a capital one – PLN 5,000.
The engine takes oil – how to repair?
If your engine is taking oil, you definitely have something to worry about. The norm is exceeded when the vehicle “burns” about 0.5 L of oil per 1000 km, although the fuel consumption of 0.25L per 1000 km should also worry you. To be sure, you can also measure the compression pressure – thanks to this you will gain information about the status of the piston rings. Sealing one of them may cause the oil intake to exceed the nominal values. Then the best solution is to replace them.
Faster oil burning may also be caused by the failure of the turbocharger, which is designed to increase the power of the engine. If you hear such a diagnosis from a mechanic, you can prepare for its replacement or regeneration – basic regeneration (e.g. cleaning and removal of carbon deposits) costs from PLN 700 to PLN 1500; full regeneration (e.g. cracks on the body or housing) costs from PLN 1500 to PLN 2000.
If, on the other hand, valve sealants are the cause, the only option is to replace them. Therefore, thinking about general regeneration and repair, we will pay dearly for the better condition of our equipment. However, there is a simpler solution, and that is the additives for engine oil.
Cheap engine regeneration – effective oil additives
The Ceramizer engine oil additive, by combining with the oil while driving, begins the process of engine regeneration. During the operation of the engine, a ceramic-metal layer is created on its surface, which rebuilds defects in the structure of piston rings, cylindrical smoothers and shells during the course of 1500 km. It also reduces the wear of rubbing surfaces.
So if you are wondering what engine oil additives will regenerate your engine, reduce oil consumption, equalize the compression pressure level, and in the event of an oil leak will protect your vehicle for up to 500 km. Looking at the ranking of engine oil additives, the Ceramizer brand will certainly catch your eye. In addition, its price does not exceed PLN 100. In the event that you risk costly repairs, for which you will pay in hundreds or thousands of zlotys, it is better to bet on car chemistry.
