
Engine (CM-4T) – Ceramizer for four-stroke engines of scooters and ATVS
51,00 PLN (41,46 PLN netto)
Preparat, którego celem jest regeneracja i zabezpieczenie części silnika skutera i quada przez dalszym zużyciem.
In stock
Previous lowest price was 51,00 PLN.
Product description
Ceramizer® CM-4T is an engine oil additive for regeneration and protection against wear and tear of the friction surface, inside the engine of scooters and atvs.
Regeneration does not require dismantling the mechanism, as it takes place under normal operating conditions. After application, the oil additive forms a special protective layer that builds up particularly intensively in worn areas where significant friction forces act.
Thanks to this layer, all micro-damage and defects are evened out and eliminated. The formation of the protective layer continues until a distance of approximately 1,000 km has been covered. The ceramic coating retains its protective and regenerative properties until a distance of 30,000 km has been covered.

Why is it worth using Ceramizer® CM-4T engine regeneration additive?
- Parts of the engine, subject to frictional forces, are regenerated and become up to 10 times stronger.
- The level of fuel consumption is significantly reduced. The observed savings range from 3 to 15%.
- Thanks to the equalization of compression pressure in the cylinders, engine dynamics are increased.
- The oil uptake by the engine is significantly reduced.
Usage method
| Engine capacity: | 50cc | 150cc | 250cc | 400cc |
|---|---|---|---|---|
| Mileage: 1-15 thou. km (20-300mth) | 0,5 dos | 1 dos | 1 dos | 1 dos |
| Mileage: 15-30 thou. km (300-600mth) | 1 dos | 1 dos | 1 dos | 2 dos |
| Mileage: >30 thou. km (>600mth) | 2 dos | 2 dos | 2 dos | 3 dos |



