Powered by Smartsupp
+48 22 498 09 08 info@ceramizer.pl
Log in

Manual for bicycle chains (CBB)

Where to buy?
Partner map
Apply in the workshop
Workshop map

  • Silnik (CS) – Ceramizer do silników czterosuwowych benzynowych, Diesla, LPG


    Zobacz produkt

  • (Skrzynia) Ceramizer CBAT do automatycznych skrzyń biegów


    Zobacz produkt

  • Skrzynia (CB) – Ceramizer do manualnych skrzyń biegów i tylnych mostów


    Zobacz produkt

  • (Silnik+skrzynia) Ceramizer CM – do silników motocyklowych czterosuwowych


    Zobacz produkt

The highest efficiency in the use of Ceramizer is achieved by® strictly following the recommendations and instructions.

  1. Best effects are obtained when using Ceramizer® according to the manual.
  2. During the whole ceramization process (approx 350 km) – do not remove the lube ( unless the chain is dirty- in such a case CBB should be applied once again).
  3. Ceramizer® CBB can be used in all types of bikes: MTB, offroad, city bikes.
  4. Can be used in all types of chains: HG, IG, UG, PowerGlide, EXA-Drive, Ultra-Drive.
  5. A lowered dosage of Ceramizer® will not bring expected effects.
  6. It is not advised to use Ceramizer® CBB in excess as to much lube will not make the ceramization process quicker.
  7. For optimal results it is advised to apply Ceramizer® on a clean chain.

PACKAGE CONTAINS:

  1. This manual.
  2. Two dispensers each a 4 g of net weight.

RECOMMENDATIONS:

  1. Use Ceramizer® CBB on a clean chain.
  2. Use on every stage of chain exploitation.
  3. Ceramizer® CBB is a basic lube for chain lubrication with additional regenerative effect due to metal-ceramic layer creation.
  4. Use with every type of metal out of which chains and sprockets are made.

INSTRUCTION:

  1. Clean the chain from lube residue and dirt.
  2. Apply evenly on the inner side of the chain (links) so that the 1/2 syringe is enough for the whole chain length.
  3. On next application clean the chain beforehand and use less e.g. 1/3 dosage.
  4.  Subsequent applications always after cleaning the chain.
  5. The lube needs to eb evenly applied on the inner links of the chain.
  6. During first revs the lube will be evenly distributed on the whole active chain surface.
  7. The lube density allows to penetrate the chain seals and lubricate all working surfaces of chain and sprockets.
  8. Do not overapply lube on partic ular links to avoid splashing.

COMMENTS:

Syringes with minor leaks are considered as normal product.

SAFETY:

  1. The product is safe in accordance with current EU standards.
  2. Store below +40 oC.
  3. Cermizer® CBB does not react with rubber elements.
  4. Does not contain lead, teflon, molybdenum or any otehr compounds that may be harmful to the chain or sprockets.
  5. Keep out of reach of children.

RESEARCH:

Ceramizer® CBB was sucessfully tested on friction machines in order to check the friction coefficient between chain and sprockets.
Efficiency of Ceramizer® products proven in numerous tests to be seen on the www.ceramizer.pl.

EFFECTIVENESS:

When using Ceramizer® CBB the chain and sprockets will work smoothly and will be protected agains wear and tear as well as corrosion.
One application lasts for up to 350 km.
One box containing 2 syringes is enough for 4 lubrications and chain and sprocket protection for up to 1400 km.

Download  CBB manual (PDF format)