The exhaust gases that escape from the exhaust pipe should be colorless. If you have noticed that a different color of smoke is coming out of your car, it is a sign that something is happening to your vehicle. Depending on the color of the smoke, the type of malfunction will be different. Therefore, it is worth paying special attention to it. Check out what the color of the exhaust gases says and find out why this happens.
Blue
This color indicates excessive combustion of engine oil. If you are not sure if it is really oil, check its level. Too fast loss and blue smoke indicates that the engine has been damaged. The conditions in which the smoke appears are also important. Worn valve sealants are the cause of smoke when the engine enters higher revs. When the blue color of the exhaust gas also appears at idle, it may indicate worn piston rings and cylinder smoothness. If you have a turbocharged engine, this color of smoke may be caused by a defect in the turbine
White
The release of coolant into the combustion chamber is evidenced by white smoke. The reason may be a broken gasket under the head or the engine hull. The exhaust gases are then dense and can be easily distinguished from water vapor, which is a normal product of combustion and can be seen at low temperatures. If this happens, it will be necessary to repair the defect, and overhauling the engine (cost) may significantly reduce our wallet.
Black Such a color of smoke can be observed in cars with a diesel engine. It appears at high revolutions and heavy load. There is a high probability that the injection pump or exhaust gas recirculation system has failed. A visit to the workshop and a thorough analysis will be necessary. Black smoke in the gasoline engine heralds damage to the engine control.
What to do to avoid these situations?
Of course, prevention is better than cure, so if you know that your car’s engine is no longer the youngest, use the Ceramizer CS engine oil additive. Thanks to the technology based on ceramization, it produces a coating that fills the worn places with the passage of kilometers and ensures smooth operation of the pistons. The preparation creates a layer that protects against wear and reduces friction. One application is enough for about 70,000 km. The product is ideal for a situation where the engine takes oil. Ceramizer Fuel Additive (CS) effectively protects the metal surfaces of the engine from corrosion and substances that may be found in low-quality fuels. With the preparation you also take care of ecology, because it reduces the emission of toxic exhaust fumes. If you do not know which additives to choose for engine oil , it is worth deepening your knowledge using our guides.
Anti-smoke engine oil additive
Now you know how to recognize an engine fault and the color of smoke should direct you in the right direction. Eliminating the problem will make it possible to fully enjoy a working engine again. It is worth taking care of it and using preparations that will regenerate it and preventively protect it against wear. Thanks to this, you will not have to worry about breakdowns and frequent visits to the workshop.
